Casting mold flux

HOME > Product & Service > Refractories for steelmaking

Introduction

Casting powder is the heart of continuous casting, which plays a key role in continuous casting process. Excellent mold flux performance could greatly improve surface quality of casting blank and casting speed.

Multiple kinds of calcium metasilicate and necessary raw materials mixed together per client’s specific steel making demands to produce mold flux.

Sheng Iron company provide not just Mold flux for clients, also customized design based on clients’ actual steel making demands. Over 30 years of casting mold flux production experience committed us to provide professional technical support & solutions for all our clients in domestic and overseas.

Five major effects of mold flux:

(1)Good lubrication for casting billets to smoothly pulled out of the crystallizer.
(2) Good insulation capacity and good diffused ability
(3) Heat transfer control, improve the heat conduction rate and uniformity.
(4) Prevent molten steel from secondary oxidation
(5)Absorb the inclusions to improve the cleanliness of the steel

According to the different types of slab and carbon content etc. Mold flux series products could divided into following types:

Slab mold flux series	Ultra low carbon steel mold flux series	Section:(100-320mm)×(800-3250mm) Casting speed:0.8-2.0m/min Applicable steel: IF steel, Oriented silicon steel, Non-oriented silicon steel ?(All specification and design can be customized, this data is for reference only)
	Low carbon steel mold flux series	Section:(100-320mm)×(800-3250mm) Casting speed:0.8-2.0m/min Applicable steel: Q195,SPHC,SPHE etc.(All specification and design can be customized, this data is for reference only)
	Medium carbon steel mold flux series	Section:(100-320mm)×(800-3250mm) Casting speed:0.5-1.8m/min Applicable steel:Q235,Q345,weathering steel etc(All specification and design can be customized, this data is for reference only)
	High carbon steel mold flux series	Section:(100-320mm)×(800-3250mm) Casting speed:0.8-2.0m/min Applicable steel:45#,65Mn,GCr15 etc (All specification and design can be customized, this data is for reference only)
	Thin slab low carbon mold flux series	Section:(50-90mm)×(850-1800mm) Casting speed: 2.8-5.5m/min Applicable steel:SPHC,SPHE etc (All specification and design can be customized, this data is for reference only)
	Thin slab medium carbon mold flux series	Section:(50-90mm)×(850-1800mm) Casting speed:2.8-5.0m/min Applicable steel:Q345,Q235 etc. (All specification and design can be customized, this data is for reference only)
Billet mold flux series	Plain carbon steel mold flux series	Section:(120-280mm)×(120-280mm) Casting speed:1.2-3.5m/min Applicable steel:Q195-275,400E,Q335,Q215 etc ?(All specification and design can be customized this data is for reference only)
	Medium carbon steel mold flux series	Section:(120-280mm)×(120-280mm) Casting speed:1.2-3.5m/min Applicable steel:20Cr, 27SiMn, 35K, 40Cr, 42CrMo, 45# etc (All specification and design can be customized, this data is for reference only)
	High carbon steel mold flux series	Section:(120-280mm)×(120-280mm) Casting speed:0.8-3.0m/min Applicable steel:47A, 55#, 65Mn, 70#, 72A. 72B, 82A, 82B, GCr15 etc All specification and design can be customized, this data is for reference only)
	Open casting billet mold flux series	Section:(120-240mm)×(120-240mm) Casting speed:1.5-3.5m/min Applicable steel:Open casting Q235, Q215, 400E, Q195 etc All specification and design can be customized, this data is for reference only
Stainless steel mold flux series	200 series	Section:(120-200mm)×(430-1200mm) Casting speed:0.8-1.5m/min Applicable steel:201,J1,J3 etc(All specification and design can be customized, this data is for reference only)
Stainless steel mold flux series	300 series	Section:(120-200mm)×(430-1200mm) Casting speed:0.8-1.5m/min Applicable steel:301,304,306L etc(All specification and design can be customized, this data is for reference only)

Contact us

For product information and pricing, chat with sales agent: